3 Pole 20A RCBO 10KA 30MA C Curve TYPE A (Busbar Type with Neutral Pigtail) - LSTO20C/003A

3 Pole 20A RCBO 10KA 30MA C Curve TYPE A (Busbar Type with Neutral Pigtail) - LSTO20C/003A

20 AMP, 30mAH, 10kA Trip Rating

This RCBO has been Tested to Fit NHP MOD6, NHP Concept One,NHP Concept Plus, Schneider Acti 9 and Only Some IPD Boards

*See Attachments Tab for Specs Sheet

Introduction

Perfectly suited to the eureka range of distribution boards and the eureka ELS6 chassis, the eureka LSTO RCBO range is the first chassis mounted RCBO unit to enter the market. At 53mm wide, it only takes up 3 poles when mounted to a din chassis, unlike other units that require 4 poles, thus losing the uniformity of phase balancing.The range can also be retro fitted into other chassis and distribution enclosure brands available on the market, or as a stand alone unit.LSIS range of MCB’s complete the range as well as the Susol MCCB which will operate upstream of the RCBO and MCB range.A comprehensive software package aids with discrimination and selectivity, to make sure all circuit breakers in a power distribution system, operate independently without nuisance tripping from downstream faults.

Features Include:

> Provides protection against earth fault / leakage current, overload and short circuit

> Breaking capacity - Icn 10kA, Ics 7.5kA

> Rated voltage - 1 pole 240VAC, 3 pole 415VAC

> Rated residual current - 30mAH

> Tripping characteristic - A type

> Magnetic tripping characteristics - C curve

> Cable termination - 25mm

> Operating temperature - -5°C – +55°C

> Standards - AS/NZ IEC/EN610009-1

> Tested and certified in Australia to Australian standards